NEC TECHNOLOGIES, INC. T-128 (CD-XT002) Card Type Hard drive controller Hard Drives supported Up to 7 SCSI devices Floppy drives supported None Data Bus 8-bit ISA Card Size Half-length, full-height [Image] CONNECTIONS Function Label Function Label 50-pin SCSI connector - J2 25-pin SCSI connector - P1 internal external USER CONFIGURABLE SETTINGS Function Label Position » Factory configured - do not SW1/1 Off alter » Factory configured - do not SW1/2 Off alter » Factory configured - do not SW1/3 Off alter » Bus bandwidth increased mode SW1/4 Off disabled Bus bandwidth increased mode SW1/4 On enabled » Boot ROM disabled SW1/5 Off Boot ROM enabled SW1/5 On » Zero wait state disabled SW1/6 Off Zero wait state enabled SW1/6 On » Factory configured - do not JP1 Pins 7 - 12 alter unidentified MEMORY ADDRESS SELECTION Setting SW1/7 SW1/8 C8000h Off On » CC000h Off Off D8000h On On DC000h On Off INTERRUPT SELECTION Setting JP1/pins 1 & 3 JP1/pins 2 & JP3/pins 3 & 4 5 IRQ3 Open Closed Open IRQ5 Closed Open Open IRQ7 Open Open Closed Disabled Pins 1 - 6 open